Western Star Resources Inc. (CSE: WSR) (OTC: WSRIF) (FRA: 4K2) has announced the first modern assay results from its Eagle Point Tungsten Project in Hidalgo County, New Mexico, a property that last saw production during the Second World War. The results, released via NEWMEDIAWIRE, show widespread tungsten mineralization and have prompted the company to advance a 17-hole, approximately 6,070-foot drill program.
Fourteen of 23 surface samples returned more than 0.10% WO3, including grab samples up to 0.55% WO3 from scheelite-bearing skarn that 2026 mapping has intermittently traced along approximately 2,600 feet of the limestone-granite contact. A continuous 13.1-foot channel sample averaged 0.11% WO3, including 0.18% WO3 over 3.3 feet. The full channel results are available in Table 1: Channel CH1 results (continuous 3.3-foot intervals), while the grab sample results are detailed in Table 2: Grab sample results (selective; not representative of grade or width).
The results matter because they provide the first modern, systematic data on a past-producing tungsten asset at a time when tungsten has become a national-security priority for the United States. China dominates global tungsten supply, and domestic deposits like Eagle Point could help reduce reliance on foreign sources. Blake Morgan, CEO and President of Western Star, stated, “These are encouraging first results from Eagle Point. We detected tungsten in every sample we collected, and the strongest results cluster in Trenches 4, 5 and 6 near the granite contact. That gives us clear targets for our 17-hole drill program, which we believe will be the first drilling at Eagle Point in more than 70 years. Tungsten supply has become a national-security priority for the United States and we believe domestic deposits like Eagle Point have an important role to play.”
Mapping during the 2026 program intermittently traced the scheelite-bearing skarn for approximately 2,600 feet along the mapped contact, with measured surface widths of 13 to 18 feet and steep dips averaging approximately 85 degrees. Samples collected to date cover approximately 1,680 feet of the mapped contact. Shortwave ultraviolet examination confirmed blue-white fluorescent scheelite, generally characteristic of low-molybdenum scheelite. An annotated photograph of Channel CH1 is available in Figure 2: Annotated photograph of Channel CH1. The photograph was digitally annotated because the original chalk markings are not visible. Red lines mark the channel start and end, the blue line marks the sampling line, and green lines mark the boundaries.
Tungsten at Eagle Point occurs as scheelite in garnet-epidote-quartz skarn developed along the contact between the Horquilla Limestone and intrusive granite. The highest tungsten values were returned from Trenches 4, 5 and 6, which lie closest to the mapped granite contact. Tungsten correlates positively with niobium, tantalum and rubidium, which the company interprets as possibly reflecting increasing tungsten toward the intrusive contact. All samples also returned elevated tin (72 to 344 ppm Sn), though its mineralogy and recoverability are unknown and tin is not considered a potential byproduct at this stage.
The company will integrate the 2026 results into its Leapfrog Geo model to finalize collar locations for the planned 17-hole, approximately 6,070-foot program of shallow, closely spaced holes testing the steeply dipping skarn contact beneath surface exposures and talus cover. Historical diamond-drill logs indicate that the host limestone overlies granite at a depth of approximately 200 to 300 feet, and planned hole depths reflect this constraint. The company is advancing drilling logistics and permitting. No Mineral Resource has been established at Eagle Point.
Scheelite was discovered at Eagle Point in 1940, and the property was examined repeatedly by the U.S. Bureau of Mines and U.S. Geological Survey between 1942 and 1957. The only recorded historical production is approximately 650–665 short tons grading approximately 0.44% WO3, mined from an open cut and shipped in 1943–44. No work has been conducted on the property since 1957. In 1955, the U.S. Government drafted and signed a Defense Minerals Exploration Administration exploration contract agreeing to fund 75% of a program of shaft sinking and diamond drilling on the property. The contract was never executed, and the planned drilling was never carried out. The company considers this exceptionally promising and a starting point for its maiden work programs.
The planned drill program is intended to test the continuity and geometry of the scheelite-bearing skarn and, if supported by drilling and assay results, provide data that could move Eagle Point to a maiden Mineral Resource Estimate. The original release can be viewed on www.newmediawire.com.
